Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
- 4. Power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of the filtering element of the air filter
   4.3. Replacement of the sensor of the index of level of fuel
   4.4. Removal and installation of the fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Fuel heating valve check
   4.9. Replacement of an adsorber of system of catching of vapors of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   + 4.14. Removal and installation of nozzles
   4.15. Check of a power-supply circuit of nozzles of the petrol engine
   4.16. Check of resistance pump nozzle
   4.17. Check of candles of an incandescence of the diesel engine of 1,9 l, 47 kW
   4.18. Check of a power-supply circuit of candles of an incandescence
   4.19. Check of the sensor of temperature of cooling liquid
   4.20. Check of the sensor of air temperature coming to the engine
   4.21. Check of the sensor of temperature of fuel of the diesel engine of 1,9 l, 74 kW
   4.22. Check of the sensor of frequency of rotation of a bent shaft
   4.23. Check of the drive of a butterfly valve
   4.24. Check of the sensor of position of the camshaft
   4.25. Check of the elekromagnitny valve of recirculation of the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kW
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation of a turbocompressor
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Valve check of pressure of pressurization
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kW

GENERAL INFORMATION

Relay block

When checking the rechargeable battery has to be charged (the minimum tension of the battery 11,5 B).

The relay is installed in the relay block in the dashboard behind the block of safety locks. Number of the relay on release cars till January, 2000 – 15 (see rice. The relay block), release since February, 2000 – 4.

PERFORMANCE ORDER
1. Remove the lower facing of the dashboard from the driver (see subsection 11.6).
2. Take out a safety lock 61 of the block of safety locks and connect tension indicator with a light-emitting diode between any contact of a safety lock and "weight".
3. Include a starter, the relay has to work (the click is heard), and the light-emitting diode has to light up. If the light-emitting diode does not burn, and the relay worked, connect the indicator to other contact of a safety lock. If the light-emitting diode does not burn again, check for break a wire between contact of 8 relays and a safety lock 61.
4. If the relay at inclusion of a starter did not work, connect the voltmeter to contacts of 2 and 6 relays, then 9 and 6. In both cases the voltmeter has to show tension of the rechargeable battery. Otherwise check wires for break and short circuit.
5. If tension is equal to tension of the rechargeable battery, connect tension indicator to contacts 1 and 2 (or 9), and then to contacts 7 and 6. Include a starter if the light-emitting diode burns in both cases, replace the relay block if does not burn, eliminate break in conducting.