Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
- 4. Power supply system
   4.1. Removal and installation of the air filter
   4.2. Replacement of the filtering element of the air filter
   4.3. Replacement of the sensor of the index of level of fuel
   4.4. Removal and installation of the fuel tank
   4.5. Check of the air valve
   4.6. Check of the gravitational valve
   4.7. Replacement of the fuel filter
   4.8. Fuel heating valve check
   4.9. Replacement of an adsorber of system of catching of vapors of fuel
   4.10. Replacement of a fuel radiator
   4.11. Removal and installation of the vacuum pump of the diesel engine
   4.12. Removal and installation of an inlet pipe of the engine
   4.13. Removal and installation of a pedal of an accelerator
   + 4.14. Removal and installation of nozzles
   4.15. Check of a power-supply circuit of nozzles of the petrol engine
   4.16. Check of resistance pump nozzle
   4.17. Check of candles of an incandescence of the diesel engine of 1,9 l, 47 kW
   4.18. Check of a power-supply circuit of candles of an incandescence
   4.19. Check of the sensor of temperature of cooling liquid
   4.20. Check of the sensor of air temperature coming to the engine
   4.21. Check of the sensor of temperature of fuel of the diesel engine of 1,9 l, 74 kW
   4.22. Check of the sensor of frequency of rotation of a bent shaft
   4.23. Check of the drive of a butterfly valve
   4.24. Check of the sensor of position of the camshaft
   4.25. Check of the elekromagnitny valve of recirculation of the fulfilled gases
   4.26. Check of the relay of the fuel pump of engines of 1,4 l, 55 and 74 kW
   4.27. Check of the electromagnetic valve of a purge of an adsorber
   4.28. Removal and installation of a turbocompressor
   4.29. Removal and installation of an intermediate cooler of air
   4.30. Valve check of pressure of pressurization
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries


Мдф egger купить на сайте spbbastion.ru.


4.25. Check of the elekromagnitny valve of recirculation of the fulfilled gases

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Disconnect a block 1 with wires from the valve 2 (3 – an ohmmeter).
3. Connect an ohmmeter to contacts of the valve and measure resistance, it has to be equal 14–20 Ohms. Its lower limit corresponds to resistance of the cold valve, top – to resistance at a working temperature.
4. If resistance of the valve differs from specified, replace the valve.