| 1. Disconnect a wire from the - plug of the rechargeable battery. |
| 2. Remove the top casing of the engine
(see subsection 2.1). |
|
|
3. Disconnect a block 1 with wires from the sensor 2 temperatures of fuel. |
| 4. Remove the sensor and, having connected an ohmmeter to its contacts, measure sensor resistance. |
| 5. Heat the sensor, having lowered it in hot water (temperature about 80 °C), and again measure its resistance. Compare the received results to the schedule (see rice. Schedule of dependence of resistance of the sensor of temperature of fuel on sensor temperature). For example, at a temperature of 30 °C resistance of the sensor has to be 3790–4270 Ohms, and at a temperature of 80 °C – 600–660 Ohms. If the measured resistance does not correspond to specified, replace the sensor. |
|