Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
- 2. Engine
   2.1. Removal of the top casing of the engine
   - 2.2. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
      2.2.1. Petrol engines of 1,4 l, 55 and 74 kW
      2.2.2. Diesel engines
   2.3. Replacement of a belt of the drive of the generator
   + 2.4. Replacement and adjustment of a tension of a belt of the drive of the camshaft
   2.5. Replacement of a chain of the drive of the camshaft
   2.6. Selection of a distributive gear wheel of a bent shaft
   2.7. Replacement of laying of a head of the block of cylinders
   2.8. Replacement of an epiploon of the camshaft
   2.9. Replacement of oil scraper caps
   2.10. Replacement of a forward epiploon of a bent shaft
   2.11. Back epiploon of a bent shaft
   + 2.12. Repair of a head of the block of cylinders
   + 2.13. Repair of the engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




2.2. Installation of the piston of the first cylinder in the provision of VMT of a step of compression

GENERAL INFORMATION

Prevention

Turn a bent shaft only clockwise (towards rotation of a shaft) for a bolt of fastening of a pulley of the drive of the generator. It is forbidden to turn a bent shaft for a camshaft pulley.


Installation of the piston of the first cylinder in the provision of VMT of a step of compression is necessary in order that at work, connected with removal of a belt of the drive of the camshaft, installation of phases of gas distribution was not broken.

Expose VMT on tags on pulleys of camshafts as at installation on a tag on a generator drive pulley in VMT there can be a piston of the either the first, or fourth cylinder. Having established VMT on a camshaft pulley, be convinced of coincidence of tags on a pulley of the drive of the generator or a pulley of a bent shaft. If they do not coincide, so installation of phases of gas distribution is broken, in this case take off a belt of the drive of the camshaft and turn a bent shaft before coincidence of tags.