Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
- 2. Engine
   2.1. Removal of the top casing of the engine
   + 2.2. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
   2.3. Replacement of a belt of the drive of the generator
   + 2.4. Replacement and adjustment of a tension of a belt of the drive of the camshaft
   2.5. Replacement of a chain of the drive of the camshaft
   2.6. Selection of a distributive gear wheel of a bent shaft
   2.7. Replacement of laying of a head of the block of cylinders
   2.8. Replacement of an epiploon of the camshaft
   2.9. Replacement of oil scraper caps
   2.10. Replacement of a forward epiploon of a bent shaft
   2.11. Back epiploon of a bent shaft
   + 2.12. Repair of a head of the block of cylinders
   + 2.13. Repair of the engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




2.11. Back epiploon of a bent shaft

GENERAL INFORMATION

DIESEL ENGINE

Prevention

The back epiploon is replaced only assembled with the holder.

The epiploon has to be made of material PTFE, a distinctive sign of such epiploon is the versatile working edge (see rice. Epiploon of a bent shaft) and lack of a spring. Before installation do not grease a working edge of an epiploon and a shaft, they have to be dry and pure.


PERFORMANCE ORDER
1. Remove the transmission.
2. Remove coupling.
3. Turn off bolts 5 (see rice. Installation of epiploons of a bent shaft) also remove a flywheel 4.
4. Remove a guard of the 6th case of coupling.
5. Remove an oil case of the engine (see subsection 3.1).
6. Turn off bolts of the 7th fastening and remove the holder 8 with an epiploon.
7. Establish the new holder with an epiploon. At the same time do not take out the directing plug from an epiploon, on this plug move the holder with an epiploon on a bent shaft. Screw bolts 7, then remove the directing plug from a bent shaft.
8. Establish all removed details upside-down.

PETROL ENGINES of 1,0 l, 37 kW And 1,4 l, 50 kW

PERFORMANCE ORDER
1. Remove the transmission.
2. Remove coupling.
3. Holding a bent shaft from a provorachivaniye, turn off bolts 6 (see rice. The block of cylinders of engines of 1,0 l, 37 kW and 1,4 l, 50 kW) fastenings also remove a flywheel 5.
4. Take out an old epiploon 7 by means of a stripper of sealing rings or having picked up the screw-driver. Wipe with a pure rag seats under an epiploon on cranked to a shaft and in the holder 8. If it is not possible to take out an old epiploon, it is possible to remove the holder 8.
5. Grease a working edge and an external surface of a new epiploon with engine oil.
6. Press a new epiploon in the holder 8 against the stop, a working edge inside.
7. Establish all details upside-down.