Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
- 9. Brake system
   + 9.1. Pedal knot
   9.2. Vacuum amplifier
   9.3. Main brake cylinder
   9.4. Pressure regulator (on models without ABS)
   + 9.5. The brake mechanism of a forward wheel like FS III
   + 9.6. The brake mechanism of a forward wheel like FS II
   + 9.7. Brake mechanism of a back wheel (drum)
   - 9.8. Brake mechanism of a back wheel (disk)
      9.8.1. Replacement of brake shoes
      9.8.2. Replacement of a brake disk
      9.8.3. Repair of a support
   + 9.9. Parking brake
   + 9.10. Anti-blocking system (ABS)
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




9.8.2. Replacement of a brake disk

GENERAL INFORMATION

Prevention

Brake disks need to be replaced along with both parties of a forward suspension bracket.


PERFORMANCE ORDER
1. Remove a support, without disconnecting from it a brake hose (see subsection 9.8). Suspend a support on a wire to a suspension bracket spring, watching that the brake hose was not tense, it was not overwound and strongly it was not bent.
2. Turn out the screw 1 (see rice. Details of the brake disk mechanism of a back wheel) of fastening of a brake disk.
3. Moisten with liquid like junction WD 40 of a disk 2 with a nave 5. Wait a little that the rust was dissolved, and remove dirt and a rust.
4. Remove a brake disk 2 from a nave 5. At the complicated removal shift a disk the rubber or polymeric hammer.
5. Carefully clear a nave 5.
6. Establish a new disk 2 and screw the screw of 1 of its fastening.
7. Before installation of a support screw the piston by means of special adaptation. In the absence of adaptation it can be made, for example, by means of nippers for removal of lock rings.
8. Establish a wheel. Finally tighten bolts of fastening of a wheel only on the car standing on the earth.
9. Several times press a brake pedal that pistons reached working position.
10. Check and if necessary add to the required level in a tank brake fluid.

Nominal thickness of a brake disk, mm
9
Minimum admissible thickness of a brake disk, mm
7

Moments of an inhaling, N · m

Bolts of fastening of a wheel
120
Screw of fastening of a brake disk
4