Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
- 9. Brake system
   + 9.1. Pedal knot
   9.2. Vacuum amplifier
   9.3. Main brake cylinder
   9.4. Pressure regulator (on models without ABS)
   + 9.5. The brake mechanism of a forward wheel like FS III
   - 9.6. The brake mechanism of a forward wheel like FS II
      9.6.1. Replacement of brake shoes and brake disk
      9.6.2. Repair of a support
   + 9.7. Brake mechanism of a back wheel (drum)
   + 9.8. Brake mechanism of a back wheel (disk)
   + 9.9. Parking brake
   + 9.10. Anti-blocking system (ABS)
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries



9.6. The brake mechanism of a forward wheel like FS II

9.6.1. Replacement of brake shoes and brake disk

GENERAL INFORMATION

Forward brake FS II mechanism

1 – external brake shoe;
2 – internal brake shoe;
3 – support;
4 – rubber plug;
5 – top plug;
6 – expansion plug;
7 – the directing finger;
8 – air duct;
9 – bolt;
10 – elastic core;
11 – a tip of a brake hose with the hollow screw and a sealing ring;
12 – rotary fist;
13, 16 – bolts;
14 – sensor of frequency of rotation of a wheel;
15 – brake board;
17 – nave;
18 – brake disk;
19 – screw

Installation of brake shoes of the brake FS II mechanism

1 – support;

2 – external brake shoe;

3 – internal brake shoe

Blocks and disks of the brake FS II mechanism (see rice. The forward brake FS II mechanism) replace similar to replacement of blocks and disks of the brake FS III mechanism (see subsection 9.5.1). The only difference consists in marking of brake shoes: a block 3 (see rice. Installation of brake shoes of the brake FS II mechanism) at which frictional overlay the area of friction is less, has to be from the inside of (the parties of the piston), from the outer side establish a block 2 at which frictional overlay the area of friction is more.

Nominal thickness of a frictional slip (with the basis), mm
19,6
Minimum admissible thickness of a frictional slip (with the basis / without the basis), mm
7,0/2,0
Nominal thickness of a brake disk, mm
18
Minimum admissible thickness of a brake disk, mm
15

Moments of an inhaling, N · m

Bolts of fastening of a wheel
120
The directing fingers
25
Screw of fastening of a brake disk
4