Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
- 7. Transmission and running gear
   + 7.1. Transmission
   + 7.2. Forward suspension bracket
   - 7.3. Back suspension bracket
      7.3.1. Removal and installation of a nave of a wheel (drum brake mechanism)
      7.3.2. Removal and installation of a nave of a wheel (disk brake mechanism)
      7.3.3. Removal and installation of a pin (drum brake to mechanisms)
      7.3.4. Removal and installation of a pin (disk brake mechanism)
      7.3.5. Removal and installation of the shock-absorber
      7.3.6. Removal and installation of a spring
      7.3.7. Removal and installation of a back suspension bracket
      7.3.8. Check and adjustment of angles of installation of wheels
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries



7.3.4. Removal and installation of a pin (disk brake mechanism)

GENERAL INFORMATION

Prevention

Editing of a carving of a pin is forbidden. The pin with the damaged carving needs to be replaced.


PERFORMANCE ORDER
1. On cars with ABS disconnect a wire from the - plug of the rechargeable battery, disconnect a block with wires from the sensor 20 (see rice. Details of a back suspension bracket with disk brakes) frequencies of rotation of a wheel, turn off a bolt of 21 fastenings and remove the sensor 20.
2. Remove a wheel nave (see subsection 7.3.2).
3. Turn off four bolts of the 8th fastening and remove a brake board 9 with a pin 15.
4. Take out a pin 15 of a brake board 9.
5. Establish a pin upside-down, having replaced new bolts of the 8th fastening of a pin with a brake board.

Moments of an inhaling, N · m

Bolts of fastening of a pin with a brake board
30, then to tighten on 90 °
Bolts of fastening of a wheel
120