Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
- 7. Transmission and running gear
   + 7.1. Transmission
   - 7.2. Forward suspension bracket
      7.2.1. Removal and installation of a telescopic rack
      7.2.2. Repair of a telescopic rack
      7.2.3. Replacement of a spherical support
      7.2.4. Removal and installation of the lever of a forward suspension bracket
      7.2.5. Removal and installation of an arm of a forward suspension bracket
      7.2.6. Replacement of a rubber-metal support
      7.2.7. Removal and installation of the stabilizer of cross stability
   + 7.3. Back suspension bracket
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries



7.2.6. Replacement of a rubber-metal support

GENERAL INFORMATION

Installation of a rubber-metal support in a beam arm

1 – a ledge on a support;

2 – a tag on an arm

The rubber-metal support can be replaced, without removing an arm of a beam of a forward suspension bracket from the car.

PERFORMANCE ORDER
1. Remove the lever of a forward suspension bracket from the car (see subsection 7.2.4).
2. By means of a stripper to a vypressuyta an old support from an arm.
3. Press a new support in an arm. At the same time the ledge 1 has to coincide with a tag 2 on an arm.
Prevention

At a press fitting it is allowed grease only it with G294 421 A1 lubricant. All other lubricants can lead to destruction of a support.


4. Install the lever of a forward suspension bracket on the car.