Skoda Fabia

since 2000 release

Repair and operation of the car


Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
- 10. Electric equipment
   10.1. Removal and installation of the block of safety locks
   10.2. Rechargeable battery
   - 10.3. System of ignition
      10.3.1. Safety regulations
      10.3.2. Removal and installation of the module of ignition
      10.3.3. Check and replacement of spark plugs
      10.3.4. Check of a power-supply circuit of the module of ignition
      10.3.5. Check of resistance of a secondary chain of the module of ignition
      10.3.6. Sensor of provision of a cam-shaft of engines of 1,0 l, 37 kW and 1,4 l, 50 kW
      10.3.7. Sensor of frequency of rotation of the crankshaft of engines of 1,0 l, 37 kW, 1,4 l, 50 kW
      10.3.8. Sensor of provision of a cam-shaft of engines of 1,4 l, 55 and 74 kW
   10.4. Removal and installation of a combination of devices
   + 10.5. Cleaner and washer of a windshield
   + 10.6. Cleaner and washer of glass of a door of a back
   10.7. Replacement of lamps
   10.8. Removal and installation of a headlight
   10.9. Removal and installation of a back lamp
   10:10. Replacement of an additional lamp of a signal of braking
   10:11. Switches and switches
   10:12. Removal and installation of sound signals
   10:13. Removal and installation of loudspeakers
   10:14. Removal and installation of the antenna
+ 11. Body
+ 12. Electrical circuitries




10.3.3. Check and replacement of spark plugs
GENERAL INFORMATION

ENGINES of 1,0 l, 37 kW And 1,4 l, 50 kW

On engines of 1,0 l, 37 kW apply candles of NGK BKR 6 of ETA-10 which gap between electrodes makes 0,9–1,1 mm.

On engines of 1,4 l, 50 kW apply candles of Champion RC 89 PYC (a gap between electrodes of 0,8-0,9 mm) or Brisk DR 15 TC (a gap of 0,75-0,85 mm).

The moment of an inhaling of spark plugs – 20–30 N · m.

PERFORMANCE ORDER
1. Remove the ignition module.
2. Turn out spark plugs.
3. Clear candles.
4. Examine a candle. If on the insulator there are cracks, the carving or electrodes is damaged, the candle should be replaced.
5. Check the round probe gaps between electrodes of candles. If necessary adjust a gap.
6. Screw candles upside-down.

ENGINES of 1,4 l, 55 I 74 kW

On these engines candles of NGK BKUR 6 of ET-10, a gap between electrodes – 1 mm are applied.

The moment of an inhaling of spark plugs – 20–30 N · m.

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Remove the top casing of the engine.
3. Remove tips with high-voltage wires 1 (see rice. Details of system of ignition of engines of 1,4 l, 55 and 74 kW) from candles of the 13th ignition.
4. Remove the holder of 12 wires.
5. Turn out spark plugs.
6. Clear candles.
7. Examine a candle. If on the insulator there are cracks, the carving or electrodes is damaged, the candle should be replaced.
8. Check the round probe gaps between electrodes of candles. The gap has to make 0,9–1,1 mm. If necessary adjust a gap.
9. Screw candles upside-down.