Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
- 10. Electric equipment
   10.1. Removal and installation of the block of safety locks
   10.2. Rechargeable battery
   + 10.3. System of ignition
   10.4. Removal and installation of a combination of devices
   + 10.5. Cleaner and washer of a windshield
   + 10.6. Cleaner and washer of glass of a door of a back
   10.7. Replacement of lamps
   10.8. Removal and installation of a headlight
   10.9. Removal and installation of a back lamp
   10:10. Replacement of an additional lamp of a signal of braking
   10:11. Switches and switches
   10:12. Removal and installation of sound signals
   10:13. Removal and installation of loudspeakers
   10:14. Removal and installation of the antenna
+ 11. Body
+ 12. Electrical circuitries



10:13. Removal and installation of loudspeakers

GENERAL INFORMATION

Scheme of installation of the radio equipment

1 – radio receiver;
2 – forward high-frequency loudspeaker;
3 – antenna;
4 – back low-frequency loudspeaker;
5 – back high-frequency
loudspeaker;
6 – forward low-frequency
loudspeaker

FORWARD LOW-FREQUENCY LOUDSPEAKER

Fastening of the forward low-frequency loudspeaker

Places of fastening are specified by shooters.

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Remove an upholstery of a forward door.
3. Drill four rivets of fastening of the loudspeaker shown by shooters on rice. Fastening of the forward low-frequency loudspeaker.
4. Take out the loudspeaker from the internal panel of a door and disconnect from it wires.
5. Install the loudspeaker upside-down, having fixed it by new rivets or suitable self-tapping screws.

FORWARD HIGH-FREQUENCY LOUDSPEAKER

Removal of the forward high-frequency loudspeaker

1 – decorative slip
external mirror;

2 – loudspeaker;

3 – connecting block

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Remove a decorative slip 1 (see rice. Removal of the forward high-frequency loudspeaker) external mirror.
3. Disconnect a block 3 from the loudspeaker 2.
4. Wring out latches and remove the loudspeaker 2 from a decorative slip 1.
5. Install the loudspeaker upside-down.

BACK HIGH-FREQUENCY LOUDSPEAKER

Removal of the back high-frequency loudspeaker

1 – decorative slip;

2 – loudspeaker;

3 – latch;

4 – connecting block

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Having accurately hooked the screw-driver, remove a decorative slip 1 (see rice. Removal of the back high-frequency loudspeaker) from a back door.
3. Disconnect a block 4 with wires from the loudspeaker 2.
4. Wring out latches 3 and remove the loudspeaker 2 from a decorative slip 1.
5. Install the loudspeaker upside-down.

BACK LOW-FREQUENCY LOUDSPEAKER

Removal of the back low-frequency loudspeaker

1 – connecting block;

2 – loudspeaker;

3 – screw

PERFORMANCE ORDER
1. Disconnect a wire from the - plug of the rechargeable battery.
2. Open a door of a back and cast away edge of an upholstery to get access to the loudspeaker 2 (see rice. Removal of the back low-frequency loudspeaker).
3. Disconnect wires from a connecting block 1 dynamics.
4. Unscrew four screws 3 fastenings and remove the loudspeaker 2.
5. Install the loudspeaker upside-down.