Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
- 7. Transmission and running gear
   - 7.1. Transmission
      7.1.1. Technical characteristics of the transmissions (T)
      - 7.1.2. Transmission of 002 type
         7.1.2.1. Removal and installation
         7.1.2.2. Check of level and filling of oil in the transmission
         7.1.2.3. Gas station of a new box
         7.1.2.4. Replacement of a cover of the lever of gear shifting
         7.1.2.5. Removal and installation of the drive of gear shifting
         7.1.2.6. Dismantling and assembly of the mechanism of gear shifting
         7.1.2.7. Check of correctness of adjustment of the drive of gear shifting
         7.1.2.8. Adjustment of the drive of gear shifting
      + 7.1.3. 02T transmission
   + 7.2. Forward suspension bracket
   + 7.3. Back suspension bracket
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




7.1.2.8. Adjustment of the drive of gear shifting

GENERAL INFORMATION

Release of clamps of tips of cables

1 – spring;

2 – clamp;

3 – tip

Fixing of the lever of gear shifting

1 – gear shifting lever;

2 – lever guide;

3 – mechanism case;

4 – core

PERFORMANCE ORDER
1. Install the gear shifting lever in neutral situation.
2. On models with engines with a working volume of 1,0 l, 37 kW and 1,4 l,
50 kW remove an air duct of the air filter (see subsection 4.1).
3. Shift against the stop clamps 2 (see rice. Release of clamps of tips of cables) cables, overcoming resistance of springs 1, also record them in this situation, having turned clamps to the left side (in the direction of an arrow).
4. Press a shaft of 1 gear shifting (on an arrow) and record it in this situation, having turned the lock lever 2 in the direction specified by an arrow.
5. Having accurately hooked the screw-driver in the places specified by shooters rice. Extraction of a cover of the lever of gear shifting from a frame, bring a cover frame out of gearing. Turn a cover inside out.
6. Move the lever 1 (see rice. Fixing of the lever of gear shifting) on the left into situation between the first and second transfers also insert a suitable core 4 into guide openings 2 levers and cases 3 mechanisms.
7. Release clamps 2 (see rice. Release of clamps of tips of cables), having turned them in the opposite direction. At the same time tips 3 will be recorded in this situation.
8. Release a gear shifting shaft, having turned the lock lever 2 in a starting position.
9. Take out a core 4 (see rice. Fixing of the lever of gear shifting) also establish a gear shifting lever cover into place.