Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
- 7. Transmission and running gear
   - 7.1. Transmission
      7.1.1. Technical characteristics of the transmissions (T)
      - 7.1.2. Transmission of 002 type
         7.1.2.1. Removal and installation
         7.1.2.2. Check of level and filling of oil in the transmission
         7.1.2.3. Gas station of a new box
         7.1.2.4. Replacement of a cover of the lever of gear shifting
         7.1.2.5. Removal and installation of the drive of gear shifting
         7.1.2.6. Dismantling and assembly of the mechanism of gear shifting
         7.1.2.7. Check of correctness of adjustment of the drive of gear shifting
         7.1.2.8. Adjustment of the drive of gear shifting
      + 7.1.3. 02T transmission
   + 7.2. Forward suspension bracket
   + 7.3. Back suspension bracket
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries



7.1.2.4. Replacement of a cover of the lever of gear shifting

GENERAL INFORMATION

Details of fastening of a cover of the lever of gear shifting

1 – handle;

2 – cover;

3 – clamp;

4 – collar;

5 – facing of the floor console

Extraction of a cover of the lever of gear shifting from a frame


Removal of a cover from the handle

1 – cover;

2 – clamp;

3 – handle;

4 – cover frame

PERFORMANCE ORDER
1. Having accurately hooked the screw-driver in the places specified by shooters on (see rice. Extraction of a cover of the lever of gear shifting from a frame), bring out of gearing a frame 4 (see rice. Removal of a cover from the handle) a cover from gearing with facing 5 (see rice. Details of fastening of a cover of the lever of gear shifting) floor console.
2. Turn a cover 2 inside out.
3. Unclench a collar 4 fastenings of the handle to the gear shifting lever.
4. Remove the handle 1 with a cover 2 from the lever.
5. Having unclenched by means of the screw-driver a clamp 2 (see rice. Removal of a cover from the handle), remove it from the handle 3.
6. Turn the handle 3 and remove from it a cover 1.
7. Establish a cover upside-down, having reliably fixed it on the handle by means of a clamp.