Skoda Fabia

since 2000 release

Repair and operation of the car


Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
- 7. Transmission and running gear
   - 7.1. Transmission
      7.1.1. Technical characteristics of the transmissions (T)
      - 7.1.2. Transmission of 002 type
         7.1.2.1. Removal and installation
         7.1.2.2. Check of level and filling of oil in the transmission
         7.1.2.3. Gas station of a new box
         7.1.2.4. Replacement of a cover of the lever of gear shifting
         7.1.2.5. Removal and installation of the drive of gear shifting
         7.1.2.6. Dismantling and assembly of the mechanism of gear shifting
         7.1.2.7. Check of correctness of adjustment of the drive of gear shifting
         7.1.2.8. Adjustment of the drive of gear shifting
      + 7.1.3. 02T transmission
   + 7.2. Forward suspension bracket
   + 7.3. Back suspension bracket
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




7.1.2.5. Removal and installation of the drive of gear shifting
GENERAL INFORMATION

Detachment of cables of the drive from levers of the transmission of 002 type

1 – wrench;

2 – cable of inclusion of transfers;

3 – cable of the choice of transfers;

4 – spherical finger

Gear shifting mechanism details

1 – lock ring;
2 – top plug;
3 – spring;
4 – lower plug;
5 – bolt of fastening of a cover;
6 – hinge cover;
7 – hinge holder;
8 – hinge insert;
9 – lever guide;
10 – noise-insulating washer;
11 – laying;
12 – gear shifting lever;
13 – rubber buffer;
14 – switching mechanism case;
15 – left plug of an axis; 		16 – bolt of the lower fastening of the case of the mechanism;
17 – axis;
18 – the directing plug;
19 – returnable spring;
20 – intermediate lever of the choice of transfers;
21 – bolt of fastening of the lever;
22 – cover;
23 – cable of the choice of transfers;
24 – cable of inclusion of transfers;
25 – lock ring;
26 – nut;
27 – right plug of an axis;
28 – lock ring of an axis

PERFORMANCE ORDER
1. Remove the rechargeable battery and an arm of its fastening.
2. Disconnect both cables 2 and 3 (see rice. A detachment of cables of the drive from levers of the transmission of 002 type) from levers on the transmission. For this purpose, working with a wrench 1 as the lever, remove tips of cables from spherical fingers of 4 levers.
3. Turn off three bolts 1 (see rice. Fastenings of an arm of cables of the drive of the transmission of 002 type) fastenings of an arm of 2 cables to the transmission.
4. Remove the handle with a gear shifting lever cover (see subsection 7.1.2.4).
5. Having accurately hooked the screw-driver, remove facing 5 (see rice. Details of fastening of a cover of the lever of gear shifting) floor console.
6. Turn off two 1 nuts of forward fastening of the case of the mechanism 2 gear shiftings.
7. Turn off eight nuts 5 (see rice. The connecting plug of a reception pipe of the muffler on models with the transmission of 002 type) fastenings also remove a cross-piece 6.
8. Having weakened an inhaling of coupling bolts of 3 collars of fastening of the connecting plug 2, disconnect a reception pipe 1 from the resonator 4 systems of production of the fulfilled gases.
9. Disconnect the resonator from a pillow of the 7th fastening of a suspension bracket.
10. Disconnect a reception pipe 17 (see rice. System of production of the fulfilled gases of the engine of 1,0 l, 37 kW and 1,4 l, 50 kW and rice. System of production of the fulfilled gases of the engine of 1,4 l, 55 and 74 kW) from pillows 8.
11. Remove the heat-insulating screen 8 (see rice. The connecting plug of a reception pipe of the muffler on models with the transmission of 002 type).
12. Turn off a bolt 16 (see rice. Gear shifting mechanism details) fastenings of the case 14 of the mechanism of gear shifting also remove the gear shifting drive from the car.
13. Replace the damaged or strongly pressed out sealing laying 11. The laying 11 executed with a glue layer is pasted on the gear shifting mechanism case.
14. Install the gear shifting drive upside-down. Before connection of cables to levers grease with a thin layer of jellied lubricant of the plug of 2 tips, without allowing hit of lubricant on consolidation of a tip 1. After installation adjust the gear shifting drive.