| 1. Install the car on the horizontal flat platform. |
| 2. Launch the engine and warm up it up to the working temperature. Stop the engine and wait several minutes until oil flows down in the case pallet. |
| 3. Take out the index of level of oil (see rice. Details of the lubrication system of the engine of 1,0 l, 37 kW and 1,4 l, 50 kW, Details of the lubrication system of the engine of 1,4 l, 55 and 74 kW, Details of the lubrication system of the diesel engine), wipe it with a pure rag and again insert into place against the stop. |
|
4. Take out the index. Level of an oil film has to be between top 1i the lower 2 tags on the index. If the level of oil approaches the lower tag or below it, add oil. |
Prevention
Oil level in a case of the engine should not be above the top tag on the index, otherwise it will lead to the raised consumption of oil and, perhaps, to failure of catalytic converter.
|
|