Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
- 11. Body
   11.1. Removal and installation of a framework of a motor compartment
   + 11.2. Forward door
   + 11.3. Back door
   + 11.4. Seats
   + 11.5. Seat belts
   11.6. Removal and installation of the dashboard
   11.7. Removal and installation of the traction coupling device
   - 11.8. Heater
      11.8.1. Removal and installation of central snuffled on the dashboard
      11.8.2. Removal and installation of a side nozzle on the dashboard
      11.8.3. Removal and installation of a lattice of an obduv of side glass
      11.8.4. Replacement of the filtering heater element
      11.8.5. Replacement of the additional resistor
      11.8.6. Removal and installation of the fan of a heater
      11.8.7. Removal and installation of the control panel of a heater
      11.8.8. Replacement of cables of the drive of a heater
      11.8.9. Removal and installation of a radiator of a heater
      11.8.10. Removal and installation of a heater
+ 12. Electrical circuitries




11.8.2. Removal and installation of a side nozzle on the dashboard

GENERAL INFORMATION

Heater elements

1 – lattice of an obduv of a windshield;
2 – central nozzles;
3 – dashboard;
4 – lattice of an obduv of side glass;
5 – side nozzle;
6 – the air duct of central snuffled;
7 – casing of the central console;
8 – dashboard arm;
9 – heater;
10 – additional resistor;
11 – heater fan;
12 – air duct of an obduv of legs of the forward passenger;
13 – filter;
14 – control panel of a heater;
15 – heater drive cable;
16 – adapter of the lower air duct;
17 – lower air duct;
18 – nozzles of an obduv for back
passengers;
19 – lattice of the exhaust ventilation;
20 – air duct of an obduv of legs of the driver;
21 – heater radiator casing;
22 – heater sealant assembled;
23 – front board sealant;
24 – air duct of an obduv of a windshield

PERFORMANCE ORDER
1. Having accurately hooked the screw-driver in the locations of clamps (in the top and lower part of the case of a nozzle), take out the case with a side nozzle 5 (see rice. Heater elements) from the panel of 3 devices.
2. Install the case with a side nozzle upside-down.