DIESEL ENGINE of 1,9 l, 74 kW
Except the frequency of rotation of a bent shaft the sensor specifies also reference points for the control unit of the engine. Therefore if the sensor signal is gone, the engine will stop.
PERFORMANCE ORDER |
1. Disconnect a wire from the - plug of the rechargeable battery. |
2. Remove the top casing of the engine (see subsection 2.1). |
|
3. Disconnect a block of I with wires from the rotation frequency sensor II. |
4. Connect an ohmmeter to contacts 1 and 2 sensors and measure resistance. It has to be 450–550 Ohms. If the measured resistance does not correspond to specified, replace the sensor. |
|
|