Skoda Fabia

since 2000 release

Repair and operation of the car

Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
- 6. System of production of the fulfilled gases
   6.1. Check of tightness of system of production of the fulfilled gases
   6.2. Removal and installation of a reception pipe of the muffler (petrol engines)
   6.3. Removal and installation of a reception pipe of the muffler (diesel engines)
   6.4. Replacement of knots of the muffler in collecting (the resonator or the muffler)
   6.5. System of recirculation of the fulfilled gases (engines of 1,4 l, 55 and 74 kW)
   6.6. System of recirculation of the fulfilled gases (engines of 1,9 l, 74 kW)
   6.7. System of recirculation of the fulfilled gases (engines of 1,9 l, 47 kW)
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries

6.7. System of recirculation of the fulfilled gases (engines of 1,9 l, 47 kW)

GENERAL INFORMATION

Details of system of recirculation of the diesel engine of 1,9 l, 47 kW

1 – inlet pipe;
2 – laying;
3 – valve of system of recirculation;
4 – bolts of fastening of the valve;
5 – collar;

6 – coupling bolt of a collar;
7 – nut of fastening of a connecting pipe;
8 – connecting pipe;
9 – final collector

Valve check of recirculation of the diesel engine of 1,9 l, 47 kW

1 – vacuum pump;

2 – connecting pipe;

3 – recirculation valve;

4 – valve membrane

Valve check

PERFORMANCE ORDER

1. Remove the top casing of the engine (see subsection 2.1).

2. Disconnect a vacuum hose from the valve 3 union (see rice. Detail of system of recirculation of the diesel engine of 1,9 l, 47 kW) of system of recirculation.

3. Connect to the valve 3 union (see rice. Details of system of recirculation of the diesel engine of 1,9 l, 47 kW) the vacuum pump 1 (see rice. Valve check of recirculation of the diesel engine of 1,9 l, 47 kW).

4. By means of the pump create depression in the valve. The membrane 4 valves has to move up (it is possible to check to the touch fingers from below of the valve), and after a detachment of the vacuum pump the membrane has to return to a starting position (it is possible to determine by an accurate sound). Otherwise the valve is faulty and it needs to be replaced.

Removal and installation of elements of system of recirculation

PERFORMANCE ORDER

1. Remove the top casing of the engine (see subsection 2.1).

2. Disconnect a vacuum hose from the valve 3 union (see rice. Detail of system of recirculation of the diesel engine of 1,9 l, 47 kW) of system of recirculation.

3. Turn off two bolts 4 fastenings of the valve 3 systems of recirculation to an inlet pipe of 1 engine.

4. Turn off a coupling bolt of the 6th collar 5 and remove the valve 3 systems of recirculation from a connecting pipe 8.

5. For removal of a connecting pipe 8 turn off two nuts of the 7th its fastening to a final collector.

6. Replace laying 2 irrespective of their state.

7. Establish elements of system of recirculation of the fulfilled gases upside-down. Replace nuts of the 7th fastening of a connecting pipe to a final collector new.

Moments of an inhaling, N · m

Bolts of fastening of the valve	25
Coupling bolt of a collar of fastening of a connecting pipe to the valve	10
Nuts of fastening of a connecting pipe to a final collector	25