Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
- 3. Lubrication system
   3.1. Removal and installation of an oil case of the engine
   3.2. Repair of the oil pump on engines of 1,0 l, 37 kW and 1,4 l, 50 kW
   3.3. Replacement of the oil pump
   3.4. Oil filter of the diesel engine
   3.5. Check of level of oil in an engine case
   3.6. Replacement of oil and oil filter
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




3.3. Replacement of the oil pump

ENGINES of 1,4 L, 55 I 74 kW

PERFORMANCE ORDER
1. Merge oil from an engine case.
2. Remove an oil case (see subsection 3.1).
3. Turn off three bolts 24 (see rice. Details of the lubrication system of the engine of 1,4 l, 55 and 74 kW) fastenings of an oil receiver 25 to the block of cylinders and the oil pump. Remove an oil receiver and its laying 23.
4. Take off a belt of the drive of camshafts and a pulley of the 20th bent shaft (see subsection 2.4.2).
5. Turn off bolts 14 and remove the oil pump 13 with laying 22.
6. Clear of dirt and wash out white spirit an oil receiver grid. If the grid does not manage to be cleared or it is damaged, replace an oil receiver.
7. Install the new pump upside-down, having replaced new laying 22 and 23.

Moments of an inhaling, N · m

Bolts of fastening of an oil receiver
10
Bolts of fastening of the oil pump
12

DIESEL ENGINES

PERFORMANCE ORDER
1. Merge oil from an engine case.
2. Remove an oil case (see subsection 3.1).
3. Remove a forward cover 5 (see rice. Details of the lubrication system of the diesel engine) the block of cylinders (see subsection 2.10).
4. Weaken an inhaling of a bolt of fastening of the tension device 7.
5. Take aside the tension device 7 and remove a chain 4 drives of the oil pump.
6. Turn off bolts 6 and remove a partition of the 16th oil case with the oil pump 1 assembled.
7. Clear of dirt and wash out white spirit an oil receiver grid. If the grid does not manage to be cleared or it is damaged, replace an oil receiver 15. For this purpose turn off two bolts of fastening of an oil receiver to the pump. At installation of an oil receiver replace a sealing ring 14.
8. Replace a gear wheel 2 with the damaged teeths. For this purpose, holding a gear wheel from a provorachivaniye, turn off a bolt 3.
9. Install the new pump upside-down.

Moments of an inhaling, N · m

Bolts of fastening of an oil receiver
15
Bolt of fastening of the tension device of a chain
15
Bolts of fastening of the oil pump and partition of an oil case
15
Bolt of fastening of a gear wheel of the oil pump
25