Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
- 2. Engine
   2.1. Removal of the top casing of the engine
   - 2.2. Installation of the piston of the first cylinder in the provision of VMT of a step of compression
      2.2.1. Petrol engines of 1,4 l, 55 and 74 kW
      2.2.2. Diesel engines
   2.3. Replacement of a belt of the drive of the generator
   + 2.4. Replacement and adjustment of a tension of a belt of the drive of the camshaft
   2.5. Replacement of a chain of the drive of the camshaft
   2.6. Selection of a distributive gear wheel of a bent shaft
   2.7. Replacement of laying of a head of the block of cylinders
   2.8. Replacement of an epiploon of the camshaft
   2.9. Replacement of oil scraper caps
   2.10. Replacement of a forward epiploon of a bent shaft
   2.11. Back epiploon of a bent shaft
   + 2.12. Repair of a head of the block of cylinders
   + 2.13. Repair of the engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
+ 11. Body
+ 12. Electrical circuitries




2.2.2. Diesel engines

GENERAL INFORMATION

. VMT installation of the piston of the first cylinder of the diesel engine

C – opening of the block of cylinders;

1 – the tag (arrow) on a back cover of a belt of the drive of the camshaft has to coincide with a hollow between two ledges on a camshaft pulley nave;

2 – MR-301 adaptation has to enter openings of a pulley and a head of the block;

3 – the T10050 device for installation in VMT of a bent shaft has to enter an opening From the block of cylinders, at the same time tags on adaptation and a pulley have to coincide


The piston of the first cylinder is installed in the provision of VMT of a step of compression the same as the piston of the petrol engine (see subsection 2.2.1).

Tags of VMT of the diesel engine of 1,9 l, 74 kW of TDI are shown in the drawing.