Skoda Fabia

since 2000 release

Repair and operation of the car



Skoda Fabia
+ 1.1. Description of the car
+ 2. Engine
+ 3. Lubrication system
+ 4. Power supply system
+ 5. Cooling system
+ 6. System of production of the fulfilled gases
+ 7. Transmission and running gear
+ 8. Steering
+ 9. Brake system
+ 10. Electric equipment
- 11. Body
   11.1. Removal and installation of a framework of a motor compartment
   + 11.2. Forward door
   + 11.3. Back door
   + 11.4. Seats
   + 11.5. Seat belts
   11.6. Removal and installation of the dashboard
   11.7. Removal and installation of the traction coupling device
   + 11.8. Heater
+ 12. Electrical circuitries




11.7. Removal and installation of the traction coupling device

GENERAL INFORMATION

Details of the traction coupling device

1 – traction coupling device;
2 – bolts;
3 – protective cap;
4 – a hook with a spherical head;
5 – cap;
6 – screw;
7 – washers;
8 – socket;
9 – sealant;
10 – socket arm

PERFORMANCE ORDER
1. Remove a hook 4 (see rice. Details of the traction coupling device) the traction coupling device according to the instruction attached to it also establish instead of it a cap 5.
2. Remove the back buffer.
3. Unscrew three screws 6 of fastening and remove the socket 8, having disconnected from it wires.
4. Take out a plait of wires from an arm 10 on the traction coupling device.
5. Turn off four bolts 2 and remove the traction coupling device 1 from the car.
6. Install the traction coupling device upside-down.

Moments of an inhaling, N · m

Bolt of fastening of the traction coupling device
70
Screw of fastening of the socket
2,5